The RC2 drill is a versatile drill capable of drilling residential, irrigation or dewatering wells with the standard package. It is designed to drill with a 4 inch drill stem to a depth of 200 ft. in alluvial materials. The drill sports a 13 ft. mast with hydraulic pull and extraction as well as a electric sand line. The 4 inch drill stem package enables the drill to penetrate 3 inch by 5 inch gravel and bring it to the surface from full depth. That is something no other drill in this price range can do. The electric start drill engine is twice the horsepower as our next smaller drill. The RC2 comes with its own air compressor and break out tools. This rig is perfect for citizens, farmers and dewatering contractors, as well as professional well drillers. It comes with its own highway towing rated trailer, air pump and engine and our rugged top head drive. With 100 ft. of 4 inch PVC drill stem the rig is priced at $18,995.
This tough drill is built on a 10 ft. highway transportable trailer. It comes standard with enough horsepower to turn a 12 inch reverse flow bit in a gravel filled environment. The drill sports a pressure / flow control system to assist in drilling the most difficult alluvial soils and soft rock. The drill bit is interchangeable and can be tripped out with both soft clay and alluvial sand and gravel bits. We are confined to rating our equipment by its proven drill depth with its theoretical abilities. It is designed for drilling in excess of 200 ft. depth. However, the lifting capacity of the winch indicates it will drill much deeper. The drill comes with its own 18 CFM gas powered compressor, 15 GPM hydraulic system, 13 ft. mast to handle 10 ft. long PVC drill stem, a fully enclosed mast for discharge, pipe slips and breakout system for the pin connected drill stem. It has 3 heavy duty sidewinder jacks and a fully functional control panel with hydraulic controls and electrical engine starting system. The mast is raised by a powerful hydraulic cylinder and the top head drive and pull down are all fully hydraulic.
Optional equipment includes:
Swap standard engines for Honda engines, 700 dollars each.
Swap engines for air cooled diesel engines by Kohler, 1200 dollars each.
Tractor mount or skid steer mount, deduct 1500 dollars.
Exchange 100 ft. of 4 inch drill stem for 8 inch drill stem and bit, 1800 dollars.
Exchange 4 inch sub for 8 inch sub, 200 dollars.
Exchange 1/4 inch air line for 1/2 inch air line before fabrication , 200 dollars.
Please ask about our portable mud pit option.
You may pick up this drill at our barn in Georgetown, Texas. We have a forklift to assist in loading on your truck.
You may arrange for us to load on a commercial carrier.
We will deliver your machine to you for 1 dollar per traveled mile plus 100 dollars per night for motel expense for trips more than 600 miles from Georgetown, Texas.
Delivery is free within 60 miles of Georgetown, Texas.
We are confident that once you see the advantages of the RC2 drill over every other drill, you will purchase our rig.
Our drills are based upon our reverse flow drilling patent. That patent makes us the only drill rig manufacturer that is capable of building drills, in this price range, that will drill large diameter wells and remove from those wells gravel and stone as large as 3 inches by 5 inches. Our drills are the only drills on the market that can be set up to drill with direct circulation tools, augers, down the hole hammers or reverse flow drilling equipment. That means that when the other drillers have to leave an unsuccessful borehole behind, because of having the wrong equipment, we can still be drilling. And because our drills can use any drilling platform, you are less likely to be unable to reach the pay-zone. We are the only drill manufacturer that can use our versatile patented equipment to insure that you have the greatest chance of finding good fresh water.
Compare our prices with any other drill manufacturer's prices and you will find we are not only the best, our prices are the most competitive. Order your drill today.
This device contains patented components and systems. Each drill comes with a non-exclusive license for the area in which the drill will be used. The license is good for the number of wells you intend to drill each year with your purchased machine. The license applies to each single purchased drill only and is for any number of wells you choose to drill. The license can be transferred. You must request a license for the number of wells you intend on drilling each year.
You are invited to apply for an exclusive license for your area for up to 10,000 square miles for a negotiated sum. In that case you would be the only driller in that area to be entitled to use this patented device.